涂布方式：微凹涂布、狭缝涂布、刮刀涂布、浸泡涂布等。

用途：光学膜涂布复合材料、太阳能电池背板、柔性线路板涂布复合、在线永久防静电片材。

涂布单元简介：涂布单元主要用于柔性线路板涂布生产线。利用可换的控隙片来改变涂层的厚度和宽度。涂层厚度可从不足1μm到254μm。在涂层厚度只有2μm的情况下，将整个宽度上的涂层量控制在5%左右的公差变化范围内。涂布辊采用伺服电机驱动，可根据涂布工艺的不同调整辊筒转速以满足生产需要。模头的调节部分采用伺服电机控制、千分表显示，能够准确的控制涂布模头与基材的距离，以满足涂布量的要求。

Coating unit is mainly used in the flexible circuit board coating production line.The thickness and width of the coating can be changed by using a replaceable gap plate.The coating thickness can range from less than 1 mu m to 254 mu m.Under the condition that the coating thickness is only 2 mu m, the coating amount of the whole width is controlled within the tolerance range of 5% or so.The coating roller is driven by servo motor, which can adjust the roller speed according to the coating process to meet the production needs.The adjusting part of die head adopts servo motor control and micrometer display, which can accurately control the distance between coating die and base material to meet the requirement of coating quantity.

在线防静电涂布设备简介：该设备是在PET/PP/PS/ABS/PC等片材生产线的基础上增加的辅助设备，可在基材的表面涂一层防静电液，并采用循环烘箱加热烘干，涂布后表面电阻值不随环境温度湿度变化而受到影响，无粉末油污析出，环保不含有害物质等特点。

Introduction of online anti-static coating equipment :This equipment is used base on PET/PP/PS/ABS/PC sheet production line , which coating a layer of antistatic fluid on the base sheet , and use circulation oven for drying ,the surface resistance of coating is not affected by the change of ambient temperature and humidity. No powder oil precipitates out,environment protection doesn’t contain harmful substance and other characteristics.

Tel：021 6959 5913.    

地址：上海市曹安公路4315号